Connect TrixBox to Alcatel OmniPCX (OXO)

For your test try my configuration. It working:

Asterisk @ Home 1.1

Asterisk @ Home H323 add-on (oh323 implementation + GNU Gatekeeper)
download asteriskathome-h323-1.0.zip from http://sourceforge.net/project/showfiles.php?group_id=123387

You configure NetMeeting (change default audio codec to g711 ulaw o alaw) or Ekiga H323 softphone for dial in asterisk using gateway asterisk address. Simple!!!

In this moment is possible only dial from H323 phone not to H323...working in progress

My oh323.conf file...

;
; Configuration file of OpenH323 channel driver
;

;-----------------------------------------
; General configuration options
; (ports, jitter, GK, ...)
;-----------------------------------------
[general]
;
; Address to bind to for incoming connections.
; Default is ALL.
;
listenAddress=0.0.0.0
;
; Port to listen to.
; Default value is 1720.
;
listenPort=1720
;
; Port to connect to.
; (Used only when we don't have a gatekeeper)
; Default value is 1720.
;
connectPort=1720
;
; Configure TCP port range to be used by H.323
;
tcpStart=10000
tcpEnd=20000
;
; Configure UDP port range to be used by H.323
; Note: The port range used by RTP are configured from
; "rtp.conf"
;
udpStart=10000
udpEnd=20000
;
; Enable fast start (yes,no).
;
fastStart=yes
;
; Enable H.245 tunnelling (yes,no).
;
h245Tunnelling=no
;
; Enable early H.245 messages in call SETUP message.
;
h245inSetup=yes
;
; Enable in-band-DTMF detection.
; (Note: Netmeeting uses in-band DTMFs)
;
inBandDTMF=yes
;
; Enable silence suppression.
;
silenceSuppression=no
;
; Set jitter buffer (in milliseconds, 20...10000).
;
jitterMin=20
jitterMax=100
;
; Set IP Type-of-Service byte for RTP channels.
; Valid values for this option are:
; lowdelay, throughput, reliability, mincost, none
;
ipTos=lowdelay
;
; Set the maximum number of inbound/outbound/simultaneous
; H.323 connections.
;
outboundMax=10
inboundMax=10
simultaneousMax=10
;
; Set the bandwidth limit for H.323 connections.
; The value is in Kbps.
;
;bandwidthLimit=1024
;
; Set tracing options for the wrapper library and for the
; OpenH323 library.
; libTraceFile can be 'stdout' or a full path name to the tracefile.
; Only trace info for OpenH323 is logged in libTraceFile.
;
wrapLibTraceLevel=1
libTraceLevel=0
libTraceFile=stdout
;
; Disable gatekeeper or specify a gatekeeper.
; Valid values for this option are:
; DISABLE,
; DISCOVER,
; ,
; ,
; GKID:
;
;gatekeeper=192.168.1.2
;;;gatekeeper=DISCOVER
gatekeeper=10.10.10.11 <----CHANGE YOUR IP ADDRESS

;
; Set the gatekeeper password
;
;gatekeeperPassword=secret
;
; Set the gatekeeper registration timeout
;
gatekeeperTTL=600
;
; Set the mode for sending user-input
; Valid values for this option are:
; Q931 - Q.931 Keypad Information Element
; STRING - H.245 string
; TONE - H.245 tone
; RFC2833 - RFC2833
;
userInputMode=RFC2833
;
; AMA flags (default, omit, billing, documentation)
;
amaFlags=default
;
; Account code
;
accountCode=H323
;
; Set the default context of H.323 calls.
;
;context=voip-h323
context=from-internal

;-----------------------------------------
; Configure H.323 aliases, prefixes and
; related ASTERISK's contexts
;-----------------------------------------
[register]
;
; Aliases/prefixes associated with the default context
; defined in section [general].
;
alias=asterisk
alias=123

;
; Aliases/prefixes routed in "all-aliases" context.
;
context=all-aliases
alias=ASTERISK
alias=666
;
; Aliases/prefixes routed in "more-aliases" context.
;
context=more-aliases
alias=665
;
; Aliases/prefixes routed in "all-prefixes" context.
;
context=all-prefixes
gwprefix=00
gwprefix=01
;
; Aliases/prefixes routed in "more-stuff" context.
;
context=more-stuff
alias=664
gwprefix=02

;-----------------------------------------
; Specify and configure CODEC related
; options
;-----------------------------------------
[codecs]
;
; Define the codec list of the channel driver.
; Every "codec" option may have a "frames" option
; associated with it.
; Valid values for the "codec" option are:
; G711U - G.711 u-Law
; G711A - G.711 A-Law
; G7231 - G.723.1(6.3k)
; G72316K3 - G.723.1(6.3k)
; G72315K3 - G.723.1(5.3k)
; G7231A6K3 - G.723.1A(6.3k)
; G7231A6K3 - G.723.1A(6.3k)
; G726 - G.726(32k)
; G72616K - G.726(16k)
; G72624K - G.726(24k)
; G72632K - G.726(32k)
; G72640K - G.726(40k)
; G728 - G.728
; G729 - G.729
; G729A - G.729A
; G729B - G.729B
; G729AB - G.729AB
; GSM0610 - GSM 0610
; MSGSM - Microsoft GSM Audio Capability
; LPC10 - LPC-10
; Number of frames in RTP packet (if not specified) is 1.
;
codec=G711U
frames=50
;codec=G711A
;frames=20
;codec=G711U
;frames=20
;codec=GSM0610
;frames=4
;codec=G7231
;frames=2
;codec=G729
;frames=2

HAve you been able to connect the OXO with an asterisk??,
PLease could you post instructions???
thank you!

Hi! I know this is an old thread, but I'd like to hear from those of you who linked an Alcatel OXO with TB. I will be doing this in a few weeks, so any info is welcome!

Did you get any success with the OXO-TB combination? Which OXO version were you using?

Thanks!