Broadvoice and Trixbox 2.2.9 - Trunk regisetered OK, Internal calls OK, Out going work, no incoming
Submitted by computerlady911 on Thu, 12/06/2007 - 12:14pm.
Problem: Outgoing calls result in: works but echo is bad
Incoming calls result in: "The number you have reached is not in service" - coming from trixbox.
Environment:
Provider: Broadvoice
Computer: behind firewall: Netgear FVS318v3, AMD Sempron 2800, 2GB Ram, 300GB HD
___________________________
Trunk: Registered okay
Outbound Caller ID: 7778889999
Maximum Channels: 2
Dial Rules: empty
OUTGOING SETTINGS:
Name: broadvoice
authname=7778889999
canreinvite=no
context=from-broadvoice
dtmf=inband
dtmfmode=inband
fromdomain=sip.broadvoice.com
fromuser=7778889999
host=sip.broadvoice.com
insecure=very
secret=passworde
type=peer
user=phone
username=7778889999
INCOMING SETTINGS
context=from-trunk
type=user
REGISTRATION STRING
7778889999@sip.broadvoice.com:PAssWOrD:7778889999@sip.broadvoice.com/100
_____________________________________________________
OUTBOUND ROUTE:
Route name: broadvoice
Dial Patterns: 1NXXNXXXXXX NXXNXXXXXX NXXXXXX (I want to use this for both local and long distance)
Trunk Sequence: 0 SIP/broadvoice
____________________________________________
INBOUND ROUTE:
Description: sip.broadvoice.com
DID Number: empty
Caller ID Number: empty
Extensions: 100
All else left at default.
_________________________
I have read a lot of the posts on Broadvoice and have tried a lot of the different settings. This is as close as I have gotten to a working system. Just need inbound to work and then I can see what can be done about the echo.
Member Since:
2007-12-03