Home » Forums » trixbox forums » Help
ftocc

Endpoint manager for Grandstream phones

ptemplin7
Posts: 76
 Member Since:
2007-03-23
Submitted by ptemplin7 on Thu, 05/15/2008 - 4:37pm.

Hi,

I'm trying to use the endpoint manager to configure the Grandstreams we are deploying.
I have run the setup-grandstream from the console.
My trixbox is on the 192.168.2.0/24 network. The phones are on the 192.168.1.0/24 network. The router between then is set to pass through all communications (or should be).

I can change the IP in the screen but still can't see my Grandstream 2020 phones. Seems like I shouldn't have to add the phones one by one using there MAC's.

Any suggestions, What is the best way to do this?
BTW I we will be shortly getting the Trixbox on the same network as the phones.

Thanks Paris

‹ Error when trying to update conf file Trunk unregistered cause extension register loss... Why? ›
--

Paris Templin
Quality Computer Consulting for the North Puget Sound, Washington
www.templincomputing.net



jingxi02
Posts: 114
 Member Since:
2007-05-19
scripting is neeeded
Thu, 05/15/2008 - 4:49pm

If the phones are on different subnet, the endpoint manager is not going to be able to discover the phones. I saw somebody has a post here to modify the script file a little bit and tell it to send discovery message to other subnet. That might work for you.



ptemplin7
Posts: 76
 Member Since:
2007-03-23
thanks
Thu, 05/15/2008 - 4:56pm

Thanks, I'll try narrowing the search I did looking for the script.

I plan to get them on the same subnet soon!

Paris Templin
Quality Computer Consulting for the North Puget Sound, Washington
www.templincomputing.net

--

Paris Templin
Quality Computer Consulting for the North Puget Sound, Washington
www.templincomputing.net



pcott
Posts: 129
 Member Since:
2006-05-31
Do you have a route between
Thu, 05/15/2008 - 5:29pm

Do you have a route between the teo subnets? Cause that would definitely cause problems for you.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.