Freepbx extensions not written in config file
Submitted by querinus on Mon, 06/26/2006 - 4:03pm.
I just installed tribox. It's for experimenting VOIP.
Had AAH installed for a few days. Same problem.
Somehow the changes using "Freepbx add an extension" doesn't work.
When I edit the config files and add the numbers in extension and sip additional.conf I can get soft sip phones registered and call each other.
How can I let freepbx do the work?
Re: Freepbx extensions not written in config file
Sun, 06/04/2006 - 9:31pm
how would you add an extension to the file, would you give me an example? Lets say that I have sip extension 200, a fxo card configured connected to a pstn line wich could be 0000000000. When I dial the pstn number I get a message that says that the number has been disconnected.
How and where do you enter this information, I was just about ready to start editin the extensions.conf file and I found your post saying not to edit this file.
Thank you very much.
Re: Freepbx extensions not written in config file
Sun, 06/04/2006 - 10:01pm
use freepbx and add your extensions and trunks there. You can do most anything you want through the gui. If you start adding things manually (in the _custom.conf files) you will want to make sure to have some understanding of how the freepbx dialplan works to keep from strange or unexpected behaviors.
p
Member Since:
2006-06-04