Inbound Route and Outbound problem
Submitted by Gmotes on Thu, 05/15/2008 - 6:52am.
Hello,
I am new in Assterisk and Trixbox and I have system that 1 Voip Gateway AudioCodec, Sip phone and Trixbox ... I registered my sip phone succesfully and I also use a softphone with these two extension I can call each other. The problem comes when I try to make outgoing call and getting inbound call..
My configuration is the following;
Inbound Route
any CID/any DID
I didnt add any configuration..
Trunk section Zap Trunk
Maximum channels:1
Zap Identifier: 1
Outbound Route
Route Name: 9_outside
Dial Patterns: 9|.
Trunk Sequence: ZAP/1
so, Trixbox report show that when a call coming outside it answered Destination s and also neither my sip phone nor softphone ringing. When making a call it shows No answered.
Please help..
Thanks in advance.
Thanks for reply.
I have a
Thu, 05/15/2008 - 7:53am
Thanks for reply.
I have a such system that a gateway receives PSTN from FXO port. Gateway,Trixbox, Ip phone are on the same network. Actually, In first time when a call my PSTN from outside my ipphone rang. But this I could not achieve..
What am I trying to do is from my SIP device extensions by pressing 9 getting outside and making outgoing calls through gateway -> PSTN ..
And getting calls PSTN->GATEWAY-> IpPhone..
Thanks in advance.
Member Since:
2008-05-06