Trixbox Cluster (HA & DRDB 5*9 Solution with 2 Redfone Dual E1) automatic Failover for 300 Users
Submitted by moe_70 on Tue, 03/27/2007 - 6:30am.
Server Setup
base was trixbox 1.2.3 --> untrixed and updated Asterisk source
2 * HP DL380 Dual Proc 3GB Ram
2 * Red-fone Fonebridge2 Dual E1
300 * Grandstream GXP2000 & Few Grandstream ATA Adapters for Analog Polycom Conference phones
Customization on extension to fit enterprise environment
implementation of monitoring (nagios) / Fax on DID / Call conference bridging
the system handles around 2500 - 3500 calls per day
echo issues less then 1%
CPU less than 5%
every item is HA from Server to fonebride2 to Switch
for any question please do not hesitate to send me a mail
cheers ya all...
our next project is more than a 1000 Extension.. will update again
Info request
Tue, 05/08/2007 - 5:30am
Hello,
We currently check for a similar solution with a maximum of 350 users, with trixbox 2.x with HA and DRDB and we would like to exchange with you about your feedback, bug that you could have encountered, tweaking, and your recommadation.
My email address is : eric.poudrier@cogeco.com
TrixBox-High Availability
Fri, 05/18/2007 - 11:27am
TrixBox-High Availability Tutorial.
This documents about 2/3 of the cluster implementation. The other 1/3 is probably with DRDB as you suggest;
http://www.red-fone.com/assets/documents/Trixbox_FB2_Heartbeat_Tu...
Good luck!
I've just setup a HA
Mon, 05/21/2007 - 4:25am
I've just setup a HA configuration of Asterisk 1.4.4
Using 2xDL360 servers with heartbeat and it works surprisingly well. These boxes are sitting in a rack talking to a Sun Box that handles our inbound/outbound calls. Currently if one server fails, we failover and start asterisk on teh 2nd box and I think the outage is around 10 seconds..... not bad at all !!
Pete
Hi
Tue, 05/22/2007 - 2:32am
sorry for the late reply... did not get an email about your post
please forward me your questions to marcodc@mcsb.com we try to help ;)
cheers
Marco
hi Paul
Tue, 05/22/2007 - 2:36am
sorry for the late reply
please check out the Redfone Tutorial on Trixbox and HA
you can find it here www.red-fone.com
if this will not help you can mail me at marcodc@mcsb.com
and we will try to help with issues
cheers
marco
Clustering issue
Sat, 05/26/2007 - 2:44am
Hi,
I have two asterisk servers clustered together using heartbeat and Redfone.But when we tried to register using the Virtual IP of this clustered servers with another remote asterisk through IAX trunk,it fails.IAX2 show registry output is "registration failed'.But its working fine if we change the virtual IP to any of the cluster servers IP.Any idea to resolve this issue?
Cheers
EY
change your bind address in
Tue, 01/22/2008 - 3:31pm
Heartbeat packets routeable
Fri, 02/08/2008 - 8:21am
Reading the document with interest. Are the heartbeat packets TCP and fully routeable. Would like to have the two servers at seperate locations for GEO redundancy.
We already have multiple PSTN gateways and SIP trunking, outbound route diversity is covered.
Thanks.
Scott
Asterisk settings?
Wed, 03/05/2008 - 8:17pm
I would love to hear about information regarding the Asterisk PBX portion of the HA setup? I don't know what configuration settings to put into the trunks, outbound and inbound routes with the Redfone Fonebridge2 device. Maybe the settings are easy but I'm a newbie at the IP telephony subject.
Any help that you can provide is greatly appreciated!
Member Since:
2006-07-02