Home » Forums » trixbox forums » SIP and IAX trunks and providers
ftocc

IAX trunk

ProRider
Posts: 10
 Member Since:
2008-01-22
Submitted by ProRider on Mon, 01/28/2008 - 9:07am.

Hi,

I created a trunk for doing a Trixbox to Trixbox IAX trunk but i have a problem during the registration. The port 4569 is opened and I think that i have a problem in my expression Registrar string : my syntaxe is user:password@IP but i don't know where i find my password and my username.

I know that the question is stupid but help me...

‹ IAX and SIP Trunk not able to receive incoming call Teliax down? ›


kerryg
Posts: 6450
 Member Since:
2006-05-31
Start without requireing
Mon, 01/28/2008 - 9:13am

Start without requireing registration and build up from there to make sure its not a networking issue.

--

Kerry Garrison
I am not associated with Fonality anymore
VoipSpeak.net - Asterisk Tutorials



ProRider
Posts: 10
 Member Since:
2008-01-22
Network works
Mon, 01/28/2008 - 9:22am

The connexion between the Trixbox's works. I see the packet on wireshark and in the IAX protocol there is the message : Registration refused, Facility registration



ProRider
Posts: 10
 Member Since:
2008-01-22
Error message
Mon, 01/28/2008 - 9:29am

I have a message like : Registration refused and rejected facility.

and when i launch "systems status" i see in ASterisk CLI :
-- Remote UNIX connection
-- Remote UNIX connection disconnected
-- Remote UNIX connection
-- Remote UNIX connection disconnected
-- Remote UNIX connection
-- Remote UNIX connection disconnected



Helix26404
Posts: 295
 Member Since:
2006-06-06
The "Remote UNIX connection"
Mon, 01/28/2008 - 12:15pm

The "Remote UNIX connection" message is not related.

If you don't know your username and password, then it won't connect. What provider are you using?

--

Preston Edwards



sirthomas
Posts: 52
 Member Since:
2007-01-12
Use this guide to connect two trixboxes together
Wed, 01/30/2008 - 12:20pm

I used this guide to help me setup a simple connection between my work trixbox and my home trixbox.

http://www.freepbx.org/2006/10/26/connecting-two-freepbx-machines...

--

--
Tom -- sirthomas@gmail.com -- +1.320.310.0778 (enum enabled)



dimnet2000
Posts: 61
 Member Since:
2007-12-02
TRIXBOX CE V 2.2.4 with TRUNK IAX and SIP
Wed, 03/05/2008 - 11:37am

Hi,

I configured a IAX and SIP TRunk with FWD PULVER and I can see SIP ONLINE and one phone online.

When I try inbound call to TRIXBOX CE V 2.2.4 then the phone line ring busy. The did number working and my fwd.pulver.com working because I tested it.

So I setup inboud call to receive any calls and I have IVR menu and one phone xlite online.

I use a Modem Cable with router dhcp in DMTZ Zone for my trixbox ce server. Also port 10000 and 8080 are forwarded to trixbox ce server.

But I dont have STATIC IP address but only DYNAMIC with NAT.

So my problem is it possible that its because I have Dynamic IP with NAT or its something else?

Thank you!

Dimnet2000



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.