Home » Forums » trixbox forums » trixbox CE project bounties

How to configure DISA

seyhamoth
Posts: 7
 Member Since:
2008-02-01
Submitted by seyhamoth on Wed, 02/13/2008 - 9:21pm.

Dear sir or madam

I am learning with trixbox, but I don't know about what is DISA and how to configure it?

I look forward to hearing from you.
Thank you in advance.

Best regards,
MOTH SEYHA

‹ Bounty - Date/Time/NTP module for trixbox front-end Digium TDM400P install in Trixbox 2.4 ›


praka_slm
Posts: 47
 Member Since:
2007-01-25
it allows you dial using
Thu, 02/14/2008 - 4:33am

it allows you dial using Trixbox when you are away from Trixbox

just create a disa (with password if you want)
direct the incomming call (using did /cid or anything u have) to the disa in inbound routes

when your call goes to disa (it will ask password if you have) it will gives a dialtone
from which u can dial the number you want to call

that's all i know, try



markwho
Posts: 645
 Member Since:
2006-09-24
DISA
Thu, 02/14/2008 - 1:35pm

DISA stands for Direct Inward System Access

Allows you to call in through an IVR or a DID etc and gain access to the system as if you were actually on an extension.

Our system has an IVR with five selections. The last selection is not announced to the caller. The caller can press 9 and it routes to the DISA and asks for a password. Caller can then access voicemail, call a specific extension etc.

--

Mark



wtodd
Posts: 284
 Member Since:
2007-04-29
for security reasons:
Thu, 02/14/2008 - 4:55pm

I would recommend using this with callback feature to a specific phone number. The potential to abuse this function could otherwise possibly be exploited.



seyhamoth
Posts: 7
 Member Since:
2008-02-01
Thank you
Fri, 02/15/2008 - 3:39am

Thank your for your reply.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.