Cisco-7940 - SIP image problem - HELP
Submitted by chenchuk on Tue, 04/29/2008 - 7:57am.
Hi , i have a problem with upgrading a SIP 7940 ( 3.0 ) into ( 8.x ) . i trace the session while the 7940 boots and its looking for the file *.bin , when i download the zip file from Cisco , there is no such a file at all , the files available is ( for release 8.2 ) P0S3-08-2-00.sb2 and P0S3-08-2-00.loads .... does any1 have an idea how can i find the same file.bin ? THANX ANYWAY ! BTW - i tried also another version , all of them doesnt have the .bin file , but only the .sb2 and .loads .....
Please follow the directions
Tue, 04/29/2008 - 8:04am
Please follow the directions in this wiki to the letter.
http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+cisco+79xx
Let us know if that helps.
Scott
--
Scott
aka "Skyking"
Cisco 7940 upgrade
Tue, 04/29/2008 - 8:21am
This details how I went from V3 to V8.6 http://cat24.net/Cisco_Sip_Phones.html It may not be the only way but it has always worked for me.
FIXED !!!
Wed, 04/30/2008 - 5:15am
SCOTT AND JOHN - thanks a lot for your help !!!!! i succeed to upgrade it from SCCP -> SIPv3.0 -> SIPv6.3 ->SIPv8.x ........... the upgrade to 8.x was only for testing , we are now using 6.3 meantime.................... now i got another small issue with the logo :( , i configure the SIPDefault to send the logo URL , and its seems like the phone got it because when i press SETTING and goes to XML URLs i can see the correct url path in "Logo URL" ( http://192.168.109.100/logo/logo.bmp ) . the phone is not displaying the logo for some reason . i can open this address and get the logo with my PC/firefox using the same URL, i also follow the guidelines and make this bmp 90x56 pixels and save it as grayscale .... any idea ?
Member Since:
2008-04-29