[RESOLVED] Sangoma A200 outgoing call issues...

Incoming calls work fine, although I do not know, or cannot seem to configure trix to use the card for outgoing calls...
This is probably a simple config issue, but here are my settings.

[size=xx-small][font=Courier]
[b]lspci shows the device[/b]
00:08.0 Network controller: Sangoma Technologies Corp.: Unknown device 0040

[b]lsmod shows[/b]
Module Size Used by
af_wanpipe 31680 0
wanpipe 335648 0
wanrouter 35400 2 af_wanpipe,wanpipe
sdladrv 45308 2 wanpipe,wanrouter
md5 4033 1
ipv6 235137 12
autofs4 24773 0
i2c_dev 11329 0
i2c_core 22081 1 i2c_dev
sunrpc 162725 1
zaptel 206852 7 wanpipe
crc_ccitt 2113 1 zaptel
dm_mirror 27825 0
dm_mod 57556 1 dm_mirror
button 6481 0
battery 8901 0
ac 4805 0
joydev 10241 0
uhci_hcd 31065 0
ehci_hcd 30917 0
8139too 25921 0
mii 5185 1 8139too
floppy 58481 0
ext3 116809 2
jbd 71385 1 ext3

[b]/etc/zaptel.conf[/b]
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#

# It must be in the module loading order

# Span 1: ZTDUMMY/1 "ZTDUMMY/1 1"

# Span 2: WRTDM/0 "wrtdm Board 1"
# ??: 1 WRTDM/0/0
# ??: 2 WRTDM/0/1
# ??: 3 WRTDM/0/2
# ??: 4 WRTDM/0/3
# ??: 5 WRTDM/0/4
# ??: 6 WRTDM/0/5
...
# ??: 23 WRTDM/0/22
# ??: 24 WRTDM/0/23

# Global data

loadzone = us
defaultzone = us
fxsks = 3-4

[b]zapata.conf[/b]
;
; Zapata telephony interface
;
; Configuration file

[trunkgroups]

[channels]
;switchtype=national
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

busydetect=yes
busycount=6

usecallerid=yes
callerid=asreceived
;cidsignalling=bell
hidecallerid=no
;cidstart=ring

callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include genzaptelconf configs
#include zapata-auto.conf

group=1

signalling = fxs_ks
group = 2
channel = 3-4

;Include AMP configs
#include zapata_additional.conf

[b]zapata-auto.conf[/b]
; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
callerid=asreceived

; Span 1: ZTDUMMY/1 "ZTDUMMY/1 1"

; Span 2: WRTDM/0 "wrtdm Board 1"
; ??: 1 WRTDM/0/0
; ??: 2 WRTDM/0/1
; ??: 3 WRTDM/0/2
...
; ??: 23 WRTDM/0/22
; ??: 24 WRTDM/0/23

[b]/etc/wanpipe/wanpipe1.conf [/b]
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Tue Jul 4 15:19:00 PDT 2006
#
# Note: This file was generated automatically
# by /usr/sbin/wancfg program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_AFT_ANALOG, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCIBUS = 0
PCISLOT = 8
FE_MEDIA = FXO/FXS
TDMV_LAW = MULAW
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1

[w1g1]
ACTIVE_CH = 3-4
TDMV_ECHO_OFF = NO

[b]ztcfg -vvvvvvvv[/b]
Zaptel Configuration
======================
Channel map:
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
2 channels configured.

[/font][/size]

I have tried setting the groups in zapata.conf and changing the zap trunks in trix to match, but I still get " all chanels are busy". I even tried setting the zap trunk to 3 or 4. Same result...