spa3102 distorsion
Submitted by termy_pe on Fri, 05/02/2008 - 5:34am.
Hello...
I put the setting for ringback tone for mexicoin the 3102.
But when I make a call trough the PSTN. When the phone rings I hear a noise over the ring. I wonder if its the echo or the port impendence setting. The other party hears me clear, but I hear then with a little distorsion. The setting is for mexico. Is there a manual that explain all the settings for the 3102?
But If I call from a SIP phone the line is clear from caller and the callee party. Or when I do a Callback. The line is clear. When I call trough from a POTS phone, trough a DID, then make a call after hearing the dialtone. That where the distorsion comes. On the ringback too.
What does that? Is it the settings of the 3102. Is the DID or is it asterisk?
Thank you
the Did is the Problem...
Sun, 05/04/2008 - 9:04am
I did more testing. Its only when I call from the DID then DISA, then I call the 3102 I get some line distorsion. Onces I do the callback, Trixbox Calls me back and then call the SPA3102, theres is no problem.
So I figure, the problem is the DID, or maybe a re-invite. Or something. There must be something to do with the setting of the incoming route. That is doing the problem. I will try a DID from another provider to see if I get the same result.
If anyone had this problem in the pass, please let me know. I just dont have the proper wording for this problem. That why I cannot find a previous or similar post in the past in the forums.
Thanks,
Member Since:
2007-03-25