Home » Forums » trixbox Pro » HUDlite & HUD Pro with trixbox Pro
ftocc

HUD Lite not starting at boot and manual start still does not allow connection

wrotruck
Posts: 8
 Member Since:
2008-05-09
Submitted by wrotruck on Wed, 05/14/2008 - 8:47am.

I have recently installed Trixbox 2.0 SE and for some odd reason the Hudlite server is not starting at first boot or reboot. I have verified that IRC is started and have gone through the trouble shooting FAQ and tried to start it manually. It seems to start but still will not allow connections.

All phones, clients and the servers are behind a firewall and router. And I tried manually starting the server and the opening TCP 6600 and forwarding the port to the Trixbox server. I have even tried to telnet from inside and outside the firewall and still nothing.

My server number 115872. Any help here would be greatly appreciated.

Thanks...

-Wil

‹ HUD Server not installed Unable to log in any local client to HUD ›


Mike Joyce
Posts: 424
 Member Since:
2007-03-07
Hey Wil, I responded to you
Thu, 05/15/2008 - 8:23am

Hey Wil,

I responded to you in another thread but thought I would respond here as well. When looking at your system I see that all of the components of the HUD server are started properly. What is making you think that it is not started?

Thanks,
Mike



wrotruck
Posts: 8
 Member Since:
2008-05-09
Re-Install Fixed the problem
Thu, 05/15/2008 - 9:00am

Mike:

Thanks for the follow up. I re-installed trixbox this morning when I was having the syncing issues. (I thougt my messing with HUD may have caused my syncing issues.) The re-install seems to have fixed the problem. Sorry, I hadn't had a chance to post that since everything came back on line.

Thanks again for the follow-up.

-Wil



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.