Home » Forums » trixbox Pro » trixbox Pro Help

Unable to place calls

fdstech
Posts: 99
 Member Since:
2007-10-09
Submitted by fdstech on Wed, 05/14/2008 - 6:07pm.

server 122986

I can receive calls via teliax voip but not place them

With teliax voip setup as sip I am getting the following (all correct ports are forwarded)

When call is attempted:
May 14 16:34:28 NOTICE[4887]: cdr.c:445 ast_cdr_free: CDR on channel 'SIP/00085D188227-09804228' lacks end

when config reloads:
May 14 16:36:22 WARNING[2981]: chan_sip.c:12848 build_peer: Qualification of peer 'teliax' should be 'yes', 'no', or a number of milliseconds at line 38 of sip.conf
May 14 16:36:22 WARNING[2981]: chan_sip.c:12389 add_realm_authentication: Format for authentication entry is user[:secret]@realm at line 40

Other warnings:
May 14 16:40:26 WARNING[7083]: pbx_ael.c:1172 ast_ael_compile: Unable to open '/etc/asterisk/extensions.ael': No such file or direct

May 14 16:40:26 WARNING[7083]: pbx.c:3897 ast_merge_contexts_and_delete: Requested contexts didn't get merged

May 14 16:40:26 WARNING[7083]: pbx_config.c:1752 pbx_load_module: The use of '_.' for an extension is strongly discouraged and can have unexpected behavior. Please use '_X.' instead at line 3

‹ Sangoma A102 auto-configuration Voicemail to email From address ›
--

Matthew Shaw (A+, MCSA, MCSE, NET+)
Systems Engineer
Future Data Systems



Mike Joyce
Posts: 424
 Member Since:
2007-03-07
fdstech, I would give teliax
Wed, 05/14/2008 - 8:32pm

fdstech,

I would give teliax a call and see if they can give you better information on why they are rejecting your outbound calls.

Thanks,
Mike



fdstech
Posts: 99
 Member Since:
2007-10-09
Are the other errors
Wed, 05/14/2008 - 8:42pm

Are the other errors something I should be concerned about?

--

Matthew Shaw (A+, MCSA, MCSE, NET+)
Systems Engineer
Future Data Systems



Mike Joyce
Posts: 424
 Member Since:
2007-03-07
fd, Nah those are typically
Wed, 05/14/2008 - 8:45pm

fd,

Nah those are typically not related to anything. Getting a 'sip debug' of when you are making an outbound call would be pretty useful in figuring out the problem.

Thanks,
Mike



fdstech
Posts: 99
 Member Since:
2007-10-09
Ok, I see the problem. For
Wed, 05/14/2008 - 8:48pm

Ok, I see the problem. For local calls i have to dial the area code so i configured a dial pattern with the local area code prepended

--

Matthew Shaw (A+, MCSA, MCSE, NET+)
Systems Engineer
Future Data Systems



Mike Joyce
Posts: 424
 Member Since:
2007-03-07
fd, Cool! glad you were able
Wed, 05/14/2008 - 8:49pm

fd,

Cool! glad you were able to figure it out.

Cheers!
Mike



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.