Home » Forums » Vendor Forums - Certified » Sangoma
ftocc

upgrade A200 to A200D

sdirge
Posts: 11
 Member Since:
2007-11-21
Submitted by sdirge on Sat, 07/12/2008 - 10:57am.

Is it possible to upgrade an A200 card to have the hardware EC?

I'm looking at the A200 for my home system and am not sure if I will have echo problems on the POTS lines (only have 2) if I do I would like to have hardware EC as an option.

Thanks,

Steve

‹ A101D works but A101D-X always kills the Asterisk. Please help! desparately need wanpipe 3.3.9 rpms for zaptel 1.4.10 ›


datu503
Posts: 236
 Member Since:
2007-06-06
EC is an optional module
Sat, 07/12/2008 - 11:20am

Yes, you can start with A20001, it will most likely be good enough, however, if you are a bit more picky than most, then you can either get one now, or get one later after you test your card. I will always get an EC whenever possible.

--

Walden, Certified FtoCC Admin & Tech
www.tech-r-us.com everythingIP
www.citivoip.com everythingVOIP



marc.sangoma
Posts: 164
 Member Since:
2008-04-08
Hi, It is not possible to
Mon, 07/14/2008 - 7:20am

Hi,

It is not possible to upgrade a A200 with out an EC to an A200 with an EC. You may be able to test a card without an EC first then decide, but this is something you will have to talk about with the reseller. If you only have 2 lines then the software EC may be able to do the job, but you will have to test this to be sure of this.

Marc
Sangoma Technologies

--

Marc



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.