Home » Forums » Vendor Moderated Forums » Aastra endpoints

Aastra 57i Firmware Issue

simsjrg
Posts: 45
 Member Since:
2008-04-04
Submitted by simsjrg on Wed, 05/07/2008 - 1:53pm.

I just put the latest firmware for my 57i on my tftp and rebooted the phone. It found the new firmware but has been sitting at 60% for about 30 mins now. I don't wanna pull the plug and possibly brick it. Any advice?

‹ Trouble with Aastra XML scripts for Trixbox CE 2.6 transfer to intercom?? ›
--

Running: trixbox v2.6.0.7 | Vitelity and Teliax
For Sale: snom 360 Like New in Box. PM me if you're interested.



simsjrg
Posts: 45
 Member Since:
2008-04-04
I pulled the plug and it
Wed, 05/07/2008 - 2:09pm

I pulled the plug and it reboot and now it is right back where it was before at "60% New Firmware Do not unplug the phone!" maybe I didn't set something up correctly...

--

Running: trixbox v2.6.0.7 | Vitelity and Teliax
For Sale: snom 360 Like New in Box. PM me if you're interested.



aastra3
Posts: 69
 Member Since:
2006-11-07
You can force your phone
Wed, 05/07/2008 - 2:28pm

You can force your phone into recovery mode my holding in the 1 key and the # key during a reboot. it will give you a web page that allows you to point to a tftp server to reload the firmware. ensure the copy of the 57i.st file you have is correct. the md5 is
md5sum 57i.st
de07303b9f1c3d727bd3114d2e7dde2a 57i.st
for the 2.2.1 load



simsjrg
Posts: 45
 Member Since:
2008-04-04
Thanks for your response. I
Wed, 05/07/2008 - 2:32pm

Thanks for your response. I ended up restarting the tftp-server then rebooting the phone. It looks like it may be working this time around. I will keep you posted.

Thanks again!

--

Running: trixbox v2.6.0.7 | Vitelity and Teliax
For Sale: snom 360 Like New in Box. PM me if you're interested.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.