Trouble and don't know where to go....
Submitted by kmurrey on Sat, 11/18/2006 - 6:52pm.
I have spent the last couple of evening trying to get my Trixbox working with my 9133i telephones.
I setup the trunks, incoming/outgoing. I am using Bandwidth.com for my SIPs.
When I call my trixbox, I get the all circuits are busy. When I pick up my 9113i and try to call out, it calls out, but nothing - no answer, no ring.
I upgraded my 9113i to the newest firmware via TFTP.
I guess I am really confused.
Do I need to have the aastra.cfg file in the TFTP and the MACNAME.cfg file? I have a MACNAME.cfg that shows that I have configured some of the 9113i.
So now I am just looking to see how I should start to troubleshoot this. Should I try to get my trunks, indbound/outbound working first, before trying to get the 9113i configured?
Re: Trouble and don't know where to go....
Sat, 11/18/2006 - 3:04pm
Hi
1st, take a look at the following thread
9133i does not register
My thought is to get the phones working 1st talking to each other on the same lan as the trixbox
Register 2 new extensions using freepbx, then create their
check that the firmware aastra.cfg and the
Once you get the phones talking together then you can eliminate them and solve your outgoing SIP trunk issues.
Re: Trouble and don't know where to go....
Sat, 11/18/2006 - 6:52pm
Thanks - that seem to do the trick.
I didn't have the aastra.cfg file in the tftpboot directory. So I ran the setup-aastra which created the aastra.cfg. So I ran into my office and tried to call the phone with a softphone and it worked.
Now - just to get the incoming/outgoing calls to work.
Member Since:
2006-11-18