trixbox 2.2 with Rhino Equipment

The trixbox Yum repo appears to be missing our packages......

To install Rhino Drivers do the following,

Connect directly to a console or open an SSH connection to your box.

type: uname -r

This will tell you if you are using an smp kernel.

Download the appropriate package:
2.6.9-34.0.2.ELsmp:
wget ftp://ftp.rhinoequipment.com/Drivers/Beta/RPMS/trixbox/CE/2.2/rhi...

2.6.9-34.0.2.EL:
wget ftp://ftp.rhinoequipment.com/Drivers/Beta/RPMS/trixbox/CE/2.2/rhi...

You can install the drivers with rpm

rpm -ivh rhino-2.6.9-34.0.2.EL*.rpm

James,

Just going off the names of the rpms, are these beta drivers considered stable enough for a production machine? Are they recommended to be installed on all versions of 2.2 - 2.3?

Thanks,

Doug
www.vbcnetworks.com

Thanks for the clarification, James!

Doug
www.vbcnetworks.com

James this drivers applies to channel banks or only for cards? I am having troubles with outgoing calls with a Sangoma A102D with 2 Rhino 1 24xFXO and 1 24xFXS channel bank.
Inbound calls goes well but when an outgoing call is dialed when the other phone is picked up, the call is hunged up.

Any ideas? I've tried changing rx gain, making changes on zapata's files such as
busydetect, busycount, callprogress, etc.. but nothing worked.

I am in Uruguay, I also tried defaultzone=us es ..
I have another Asterisk (older version) with a TDM400P and it works with defaultzone=us, so I don 't think that is an indication problem.

Could It be the Rhino or Sangoma drivers?
The drivers for Sangoma is wanpipe-3.2.1

Thanks
Dikran

I´m having these messages from the box don you guys thinks could be the carrier??? I have the same configuration on other boxes and they are working fine. This is a new service and a new box. what do you think ???

Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Exception on 22, channel 11
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Got event Alarm(4) on channel 11 (index 0)
Jan 30 22:29:40 VERBOSE[4236] logger.c: Write to 42 failed: Unknown error 500
Jan 30 22:29:40 VERBOSE[4236] logger.c: Short write: 0/15 (Unknown error 500)
Jan 30 22:29:40 WARNING[4236] chan_zap.c: Detected alarm on channel 11: Recovering
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: disabled echo cancellation on channel 11
Jan 30 22:29:40 DEBUG[4236] channel.c: Scheduling timer at 0 sample intervals
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Set option AUDIO MODE, value: ON(1) on Zap/11-1
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Hangup: channel: 11 index = 0, normal = 22, callwait = -1, thirdcall = -1
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: disabled echo cancellation on channel 11
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Set option TDD MODE, value: OFF(0) on Zap/11-1
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Updated conferencing on 11, with 0 conference users
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Set option AUDIO MODE, value: OFF(0) on Zap/11-1
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: disabled echo cancellation on channel 11
Jan 30 22:29:40 NOTICE[3566] chan_zap.c: PRI got event: Alarm (4) on Primary D-channel of span 1
Jan 30 22:29:40 WARNING[3566] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
Jan 30 22:29:40 DEBUG[4244] chan_sip.c: update_call_counter(115) - decrement call limit counter
Jan 30 22:29:40 DEBUG[4244] chan_sip.c: Acked pending invite 102
Jan 30 22:29:40 DEBUG[4244] chan_sip.c: Stopping retransmission on '1f1837705a5e343619ebc2723686a622@172.100.0.210' of Request 102: Match Found
Jan 30 22:29:40 DEBUG[4244] app_dial.c: Exiting with DIALSTATUS=CANCEL.
Jan 30 22:29:40 DEBUG[3572] chan_sip.c: Stopping retransmission on '1f1837705a5e343619ebc2723686a622@172.100.0.210' of Request 102:

Thanks in advance !!!