Home » Forums » Vendor Moderated Forums » Sangoma

PRI E1 D-Channel Activity

Nommy
Posts: 14
 Member Since:
2007-09-24
Submitted by Nommy on Sat, 04/05/2008 - 2:26am.

Hi ,
Is there any Asterisk CLI command, that can display all the activities on the D-Channel of the PRI-E1 line. If not with Asterisk CLI, then by some other utility such as Wanpipemon or Wanrouter. I am using Sangoma A101d for the PRI E1.

Thanking you,

Nommy

‹ Pre installed drivers ? A200 Overruns ›
--

S.M. Nomaan Iradat.
Senior Software Engineer.
Precision Technology (Pvt.) Ltd.
C-30, Block-16,Gulistan-e-Johar,
Karachi-75290.
Pakistan.
Ph.No. 92-.21-4017080.
Cell:- 92-0333-2347894
http://nomaan.6te.net



Francisco@sangoma
Posts: 5
 Member Since:
2008-02-13
Hello I am Sangoma Tech
Tue, 04/08/2008 - 12:35pm

Hello I am Sangoma Tech Support Engineer. Please refer to http://wiki.sangoma.com/wanpipe-linux-asterisk-debugging#pri_span... for debugging your PRI line. In asterisk "pri show span 1" will show if span 1 is up and active. "pri intense debug span 1" will show you the D-channel messages. You could also use "wanpipemon –i w1g1 -c trd" to trace the d-channel. You should be getting incoming and outgoing messages.

If you need any assistance, don't hesitate to contact me at flara@sangoma.com

Thank-you,

Francisco Lara, B.ENG Software Engineer/Tech Support
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada
t. 1 905 474 1990 x 123 | e. flara@sangoma.com msn. laraf@live.com



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.