Sangoma A101 CAS Signalling
Submitted by Nommy on Thu, 04/10/2008 - 5:05am.
Hi,
What entries do I have to make in Zaptel.conf and Zapata.conf files so that my Sangoma A101 card can work with CAS Signalling. I tried to use the setup-sangoma utility from location "/usr/local/sbin". But this does not give any option to select either CCS or CAS.
Please let me know the setting that I have to make in order to run the A101 card on CAS signalling.
Thanking you,
Hello:
When you use
Thu, 04/24/2008 - 3:45pm
Hello:
When you use setup-sangoma utility, card will be automatically configure for CAS or CCS based on your selected signalling option.
eg.
Select signalling type for AFT-A104 on port 1 [slot:4 bus:7 span:1]
1. PRI CPE
2. PRI NET
3. E & M
4. E & M Wink
5. FXS - Loop Start
6. FXS - Ground Start
7. FXS - Kewl Start
8. FX0 - Loop Start
9. FX0 - Ground Start
10. FX0 - Kewl Start
[1-10]:
Which signalling are you using for your a101?
Member Since:
2007-09-24