Trixbox Pro showing A200D FXS ports as FXO's

Hello,

I am a tech support engineer from Sangoma. If you do a "wanrouter hwprobe verbose" does it show FXO or FXS modules? FXS modules are green and you should see a green LED on the four ports. Please send me the following information to flara@sangoma.com to verify the functionality of the card. Include your original post as well.

-the output from "wanrouter version"
-the output from "wanrouter restart" (asterisk needs to be turned off for this so it may need to be done after hours)
-the file /var/log/messages (the entire file containing a wanrouter restart)
-the output from "wanrouter hwprobe verbose"
-the output from “wanrouter status”
-the file(s) /etc/wanpipe/wanpipeX.conf (where X is the wanpipe number)
-the file /etc/zaptel.conf
-the file(s) /etc/asterisk/zapata*.conf
-the output from "ifconfig", (re run a couple of times with a second or so delay in between each run)
-the output from "cat /proc/interrupts" (re run a couple of times with a second or so delay in between each run)

Thank-you,

Francisco Lara, B.ENG Software Engineer/Tech Support
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada
t. 1 905 474 1990 x 123 | e. flara@sangoma.com msn. laraf@live.com